Sample - Inglewood Red
Sample - Inglewood Red
10 x 7.5cm sample.
A light terracotta, close to the colour of an unglazed clay pot. Inglewood Red brings warmth to a room without taking it over, and sits easily beside timber, stone, and plaster.
Orders shipped outside the United Kingdom will be subject to local duties and taxes, depending on location. These are not included in the shipping price and are the sole responsibility of the receiver to pay.
Product Details
Product Details
| Surface material | 12mm Elenite Acrylic Solid Surface |
|---|---|
| Substrate | No substrate |
| Finish | Factory-sanded to ~P220; final finish applied by fabricator |
| Edge | Factory edge |
| Other sizes | Full sheets must be cut and joined for bespoke sizes. |
Suitability
Suitability
- Worktops - trivets recommended for hot cookware
- Furniture and joinery surfaces - tabletops, counters, casework, shelving
- Interior wall cladding and feature walls
- Retail and hospitality fit-outs
- Wet rooms, shower areas, submerged or constantly damp environments
- External installations
| Fire classification | B-s1,d0 (EN 13501-1) |
|---|---|
| Stain resistance | Pass (ANSI 124.6) |
| Microbial resistance | Rating 1 (ASTM G21) |
| Water absorption | 0.16% (ASTM D-570, 24 hour) |
| Surface hardness | Rockwell 90 (ASTM D-785) |
Important Characteristics
Important Characteristics
| Warranty | 10 years against manufacturing defects under specified use conditions |
|---|---|
| Composition | ~35% recycled acrylic, 5-10% organic content, remainder acrylic, fillers, and pigments. |
| Installation notes | Elenite is a 100% acrylic solid surface and must be fabricated and installed by a competent solid surface fabricator in accordance with the manufacturer's fabrication guidelines. Colour-matched seam adhesive is used for joints and edge build-ups, producing virtually invisible seams across large continuous surfaces, with edges that can be built up to any thickness. Unlike stone or laminate, Elenite is a renewable surface. Light scratches and burns can be sanded out on site and the original finish restored, so worktops and panels can be brought back to as-new condition years into their life. |
| Colour variation | Natural materials within each sheet will vary in colour. Sheets are made in colour matched batches but may have some slight variance between batches. |
Shipping & Lead Time
Shipping & Lead Time
Downloads
Downloads
Made with Meganite
Bamboo fibre
A by-product of bamboo processing for furniture manufacture.
Walnut shell
Waste from the walnut industry. Gives Elenite its fine speckle.
Recycled solid surface
Offcuts from trimming Elenite ground into a fine powder.
Binder
A mixture of recycled and virgin acrylic resins.
Projects
All projects
Specify with confidence.
Tell us about your project and we will help you specify it. Trade samples are free, so get in touch and we will send them over. Datasheets, certificates, and test data for every range are on our documents and resources page.