Stelapop Sample Set
Stelapop Sample Set
6 of 10 x 7.5 x 0.5cm samples of Stelapop:
- Woad
- Indigo
- Chambray
- Starch
- Soot
- Nimes
Made from 70% denim waste sourced as garment offcuts, Stelapop can be both richly patterned and subtle. Ideal as wall panels, furniture, and table tops, it's a versatile material that suits a wide range of projects.
Price inclusive of VAT. Orders shipped outside the United Kingdom will be subject to local duties and taxes, depending on location. These are not included in the shipping price and are the sole responsibility of the receiver to pay.
Product Details
Product Details
| Surface material | 5mm Stelapop Textile Board |
|---|---|
| Substrate | No substrate |
| Finish | Matte lacquer (10% sheen) |
| Edge | Requires sealing |
| Other sizes | Custom sizes and products available - made to order |
Suitability
Suitability
- Wall panels
- Furniture
- Table tops
- Joinery cladding
- Small objects and products
- Wet areas
- Counter tops
- Exterior uses
| Fire classification | D-s3, d0 |
|---|---|
| Stain resistance | No permanent stain - 2 hours test with wine, coffee, ketchup, oil |
| Water absorption | 1.5% (ASTM D-570, 24 hour) |
| VOC emissions | 0% |
| Formaldehyde | 0% |
| Surface hardness | 3 - 4H (ASTM D 3363-2005 Scratch Resistance) |
Important Characteristics
Important Characteristics
| Warranty | 10 years against manufacturing defects under specified use conditions |
|---|---|
| Composition | 70% cotton sourced as garment offcuts, 25% water based binder, 5% natural rubber |
| Installation notes | Stelapop can be cut, drilled, and processed using normal woodworking tools. Cut edges must be sealed using a water based lacquer or sealant to prevent water ingress during the lifespan of the product. Panels are finished with a multilayer PU coating for durability in a variety of uses and environments. |
| Colour variation | Exact colour, particle size and pattern may vary within and between panels. |
Shipping & Lead Time
Shipping & Lead Time
Bespoke objects and furniture: 6-10 weeks; project dependent
Downloads
Downloads
Made with Saitex
Denim offcuts
Denim that would otherwise be wasted from garment manufacture.
Water-based glue
Binds the denim fibres into a solid panel, with no formaldehyde and 0% VOCs.
Natural rubber
Adds flexibility and strength.
Stelapop in use
All projects
Specify with confidence.
Tell us about your project and we will help you specify it. Trade samples are free, so get in touch and we will send them over. Datasheets, certificates, and test data for every range are on our documents and resources page.